Plasma CUT-100
Wholesale Price: $2,141.00
Features
- Feed-back circuit is controlled by advanced IGBT technology, output current is stable.
- Cutting current can be adjusted continuously from 20-100 Amps.
- Non-contact arc starting mode without HF, little interference to the nearby electronic equipment.
- Applicable to cut carbon steel, stainless steel, galvanized steel, copper and aluminum, etc.
- Input voltage is three phases 480V 15%.
- With protection functions of dropped phase, over or low voltage, overheat or low air pressure.
Accessories
- 1 5m TZ-100 plasma torch
- 1 set of 3m earth cables and clamps
- Air regulator
Specifications
Input power voltage | AC480V±15% |
Input frequency | 50/60 |
Input power capacity | 19.6 KVA | | |
Output current range | 20-100A | | |
Rated output voltage | 120V | |
No-load voltage | 350V | |
Duty cycle | 100% at 25℃ |
Dimensions | 26×13×24 in. | |
Weight | 110 lbs. | |
Arc-starting | HF | | |
Max. Cutting thickness | 2 in. | |
Gas flow | 5.65 cu. ft/min | | |
Insulation class | F | | |
Efficiency | 88% | | |
Power factor | 0.76 | | |